Dwrobel's Projects

dwrobel/linuxcnc

LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3D printers, laser cutters, plasma cutters, robot arms, hexapods, and more. Runs under Linux (optionally with realtime extensions). Simple installation on Debian and Ubuntu, or via our Live/Install DVD/USB images. Accepts G-code input, drives CNC machines in response. Active user community. Several different GUIs available. Compatible with many popular machine control hardware interfaces. Supports rigid tapping, cutter compensation, and many other advanced control features. Full source code available under the terms of the GNU GPLv2 (General Public License version 2). Project Home Page: http://linuxcnc.org/ Note: The linuxcnc.spec file is still a work in progress, however it is fully usable on a daily basis - physically tested with Mesa 7I92 only. Source-git repository: https://github.com/dwrobel/linuxcnc/ (see fedora sub-directory) Centos-9-stream linuxcnc repository: https://copr.fedorainfracloud.org/coprs/dwrobel/linuxcnc-centos-9/
  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/kernel-rpi

For more information see: Fedora on Raspberry Pi with downstream kernel. See also: testing downstream kernel version.
  • EPEL 8 : aarch64
  • Fedora 38 : aarch64
  • Fedora 39 : aarch64
  • Fedora 40 : aarch64

dwrobel/kernel-rpi-testing

Testing version of downstream kernel. For more information see: Fedora on Raspberry Pi with downstream kernel. See also: stable downstream kernel version.
  • EPEL 8 : aarch64
  • Fedora 38 : aarch64
  • Fedora 39 : aarch64
  • Fedora 40 : aarch64
  • Fedora rawhide : aarch64

dwrobel/golang-github-influxdata-influxdb

Influxdb 1.8.x
  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/doxygen

Description not filled in by author. Very likely personal repository for testing purpose, which you should not use.
  • Fedora 38 : aarch64, x86_64
  • Fedora eln : x86_64
  • Fedora rawhide : aarch64
  • Rhel 9 : x86_64

dwrobel/modbus-proxy

ModBus TCP proxy. Many modbus devices support only one or very few clients. This proxy acts as a bridge between the client and the modbus device. It can be seen as a layer 7 reverse proxy. This allows multiple clients to communicate with the same modbus device. When multiple clients are connected, cross messages are avoided by serializing communication on a first come first served REQ/REP basis.
  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/mongoose26

Mongoose - Embedded Web Server / Embedded Networking Library. Really old version (2.6) of mongoose.
  • EPEL 7 : x86_64
  • EPEL 8 : aarch64, x86_64
  • EPEL 9 : aarch64, x86_64
  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/perl-Template-Plugin-CGI

Description not filled in by author. Very likely personal repository for testing purpose, which you should not use.
  • Fedora 38 : x86_64
  • Fedora 39 : x86_64
  • Fedora 40 : x86_64
  • Fedora rawhide : x86_64

dwrobel/kernel-kbug-216327

Description not filled in by author. Very likely personal repository for testing purpose, which you should not use.

dwrobel/nextcloud

  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/mbusd

mbusd is open-source Modbus TCP to Modbus RTU (RS-232/485) gateway. It presents a network of RTU slaves as single TCP slave.
  • Centos-stream 9 : aarch64, x86_64
  • Fedora 38 : aarch64, x86_64
  • Fedora 39 : aarch64, x86_64
  • Fedora 40 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

dwrobel/catatonit

catatonit 0.1.7 recompiled for CentOS/RHEL 7.x (from unmodified F34 sources).
  • EPEL 7 : x86_64

dwrobel/epel-9

Extra packages for epel-9 needed for building linuxcnc.
  • Centos-stream 9 : x86_64

dwrobel/linuxcnc-centos-9

LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3D printers, laser cutters, plasma cutters, robot arms, hexapods, and more. Runs under Linux (optionally with realtime extensions). Simple installation on Debian and Ubuntu, or via our Live/Install DVD/USB images. Accepts G-code input, drives CNC machines in response. Active user community. Several different GUIs available. Compatible with many popular machine control hardware interfaces. Supports rigid tapping, cutter compensation, and many other advanced control features. Full source code available under the terms of the GNU GPLv2 (General Public License version 2). Project Home Page: http://linuxcnc.org/ Note: The linuxcnc.spec file is still a work in progress, however it is fully usable on a daily basis - physically tested with Mesa 7I92 only. Source-git repository: https://github.com/dwrobel/linuxcnc/ (see fedora sub-directory) Fedora copr repository: https://copr.fedorainfracloud.org/coprs/dwrobel/linuxcnc/
  • Centos-stream 9 : x86_64