Recent Projects

mhenn/ros2

Description not filled in by author. Very likely personal repository for testing purpose, which you should not use.

hellork/nvidia-auto-installer-for-fedora

Requirements Active internet connection Fedora 32 or above Installation If you use Fedora (32, 33, 34 ELN, Rawhide* or above), CentOS (Stream 8 or above), RHEL (8 or above), Mageia (7, Cauldron or above), OpenSUSE (Leap or Tumbleweed) - you can install NVIDIA Auto Installer for Fedora by enabling my COPR repository. Simply execute the following commands in succession to install the tool. *Rawhide notes. Install and enable the non-debug kernel repository, or expect problems due to GPL-only symbols. # dnf install dnf-plugins-core -y # dnf copr enable t0xic0der/nvidia-auto-installer-for-fedora -y # dnf install nvautoinstall -y Usage Make sure you have a working internet connection Install the tool from COPR with the above instructions Execute nvautoinstall to check installation modes Run the installation modes according to your needs Give stars to the repository if you found this helpful Modes of installation Active internet connection and superuser privilege is required to execute the following installation modes. sudo nvautoinstall --rpmadd This mode enables the RPM Fusion NVIDIA drivers repository. sudo nvautoinstall --driver This mode simply installs the NVIDIA drivers (with x86_64 deps only). Enabling the RPM Fusion NVIDIA drivers repository is mandatory before doing this. sudo nvautoinstall --x86lib This mode installs only the x86 libraries for Xorg. Enabling the RPM Fusion NVIDIA drivers repository and installing the basic drivers are mandatory before doing this. sudo nvautoinstall --nvrepo This mode enables the official NVIDIA repository for CUDA software. sudo nvautoinstall --plcuda This mode installs only the CUDA support software. Enabling the RPM Fusion NVIDIA drivers and NVIDIA official repository, and installing the basic drivers are mandatory before doing this. sudo nvautoinstall --ffmpeg This mode installs only the FFMPEG acceleration. Enabling the RPM Fusion NVIDIA drivers repository and installing the basic drivers are mandatory before doing this. sudo nvautoinstall --vulkan This mode installs only the Vulkan renderer. Enabling the RPM Fusion NVIDIA drivers repository and installing the basic drivers are mandatory before doing this. sudo nvautoinstall --vidacc This mode installs only the VDPAU/VAAPI acceleration. Enabling the RPM Fusion NVIDIA drivers repository and installing the basic drivers are mandatory before doing this. sudo nvautoinstall --getall This mode installs all the above packages. (Not been implemented yet) sudo nvautoinstall --cheksu This mode allows you to check the current user privilege level. You can use this tool effectively only when you have logged in as a root or sudo user. sudo nvautoinstall --compat This mode allows you to check your hardware and host compatibility. The tool would check your hardware and host and tell if your device is supported by the tool or not. sudo nvautoinstall --version This mode would show the tool version and exit out. sudo nvautoinstall --help This mode would show the help message and exit out. Note Active internet connection is required to download drivers. Requires secure boot to be turned off in UEFI systems. Requires superuser access for repo addition and driver setup. The drivers are fetched from the RPMFusion repository. Use discretion while using this on other spins. Only tested on 9XX/10XX/20XX series discrete cards. Use discretion while installing with older cards. No additional configuration is required for Optimus setups. Coming soon CLI "Launch using Dedicated Graphics Card" option. Intuitive mode switching for hybrid graphics. Distinct mode for using integrated or discrete GPU. Experimental support for RHEL 8 and CentOS 8. Support for older cards by active querying at NVIDIA. Native support for PRIME configuration on Optimus. Disclaimer This tool has been tried and tested multiple times and is expected to work flawlessly in Fedora Workstation 32 or above. It has not been tested on any of the spins yet so proceed with caution. While the chances of things going wrong is pretty slim but still you would want to make backups, should things do not go as expected. As always, you are choosing to use this tool at your will and you cannot hold me responsible for any mishap there may occur due to the misuse of this tool.
  • Centos-stream 8 : x86_64
  • Custom 1 : x86_64
  • EPEL 7 : x86_64
  • EPEL 8 : x86_64
  • Fedora 41 : x86_64
  • Fedora 42 : x86_64
  • Fedora eln : x86_64
  • Fedora rawhide : x86_64
  • Mageia 8 : x86_64
  • Mageia cauldron : x86_64
  • openSUSE Tumbleweed : x86_64

whot/pipewire-git

THIS REPO IS DISCONTINUED - I don't have the time to maintain it, please contact me if you want the magic script that builds it all. pipewire repository tracking git master - this is an automatic build triggered by the freedesktop GitLab instance The package version uses the build date/time for its NVR, e.g. pipewire-0.3.38-201807310551git22faa97.fc28.x86_64. Please file any issues in the upstream tracker
  • Fedora rawhide : x86_64

bitedasher/tlauncher

Unofficial Minecraft: Java Edition launcher

hobbes1069/hamlib

Project to test new versions of the hamlib library.
  • EPEL 8 : x86_64
  • EPEL 9 : x86_64
  • Fedora 41 : x86_64
  • Fedora 42 : x86_64
  • Fedora rawhide : x86_64

mtasaka/jd-nightly

jd nightly build
  • Fedora 41 : x86_64
  • Fedora 42 : x86_64
  • Fedora rawhide : x86_64

lsl/softhsm

SoftHSM for EL8
  • EPEL 8 : aarch64, ppc64le, s390x, x86_64

lsl/opendnssec

OpenDNSSEC for EL8
  • EPEL 8 : aarch64, ppc64le, s390x, x86_64

lsl/nsd

Recent versions of NSD, built for EL8
  • EPEL 8 : aarch64, ppc64le, s390x, x86_64

nsella/cyrus-sasl-xoauth2

This is a plugin implementation of XOAUTH2.
  • Fedora 41 : aarch64, x86_64
  • Fedora 42 : aarch64, x86_64
  • Fedora rawhide : aarch64, x86_64

News - Read All

Task Queue

11 Build Batches 0 Importing 0 Pending 0 Starting 73 Running

Recent Builds - View All